萝卜视频app

沈阳拉伸机

categories of news

Product Categories

contact us

Company Name: Shenyang Lubang Machinery Co., Ltd. (formerly Railway Machinery Plant)

Contact: Manager Lin

Phone: 024-86922831

Fax: + 86-024-89648866

Mobile phone: 13998189555

Email: srmf@163.com

Postal Code: 110121

Address: Wangyi Development Zone, Shenbei Street, Shenbei New District, Shenyang, Liaoning

Website: suziwh.org


Industry Information

Your current location : Home >> News >> Industry News
  • Shenyang tamping machine safety operation regulations

    Do you know any safety operating rules for Shenyang tamping machines? Preparations before going on the road: check whether the parts are completely intact and whether the foundation fasteners are loose according to the packing list. If they are loose, they should be tightened and matched. Check whether the hand pressure pump is outstanding and whether the oil inlet and outlet valves are tight. Check whether the internal oil sump of the internal combustion engine oil is on the scale
    Release time: 2019-12-18 Clicks: 6

  • Shenyang drawing machine has the characteristics of high precision

    Shenyang drawing machine has the characteristics of high precision, which can guarantee the product fundamentally, and only a few requirements are processed again. In addition, the material utilization rate of cold kneaders is generally as high as 80% or more, which greatly reduces the consumption of steel, non-ferrous metal and other raw material makers, and also reduces the production cost to a minimum. Secondly, facing a large number of orders, the advantages of cold kneaders are even more significant. only
    Release time: 2019-12-13 Clicks: 3

  • What are the maintenance methods of Shenyang tamping machine?

    Before using the Shenyang tamping machine, measure the insulation resistance before using the tamping machine that has been out of service or wet for a long time. Before each use, check the components and tighten the screws. Before working, carefully check the cables for damage and the chassis ground. The electric tamping machine should be used for 100 hours each time. The condition of bearing grease should be checked, and oil should be added if necessary.
    Release time: 2019-11-30 Clicks: 9

  • What are the uses of the Shenyang sander?

    Uses of Shenyang Grinder 1. Uses are suitable for auxiliary installation of railway tracks, bridge installation, and lifting of vehicles, equipment and heavy objects. It has the advantages of simple structure, convenient use, safety and reliability, and multiple machines. It is a widely used lifting tool. 2. Working principle This machine is a kind of manual lifting tool. Its structure is compact. Use the joystick to move up and down reasonably
    Release time: 2019-11-26 Clicks: 8

  • How to use the stretching machine

    1. Inspection of Shenyang stretcher before use (1) The hydraulic pump station should be in good condition and the oil quantity should be sufficient. When refueling, the hydraulic oil must be filtered to prevent dust from blocking the oil circuit. (2) The joints of oil cylinders and oil pipes must not be loose or leak oil. (3) The inclined iron seat, tie rods and joints must not be damaged. (4) The inclined iron base of this machine is ordinary type. When the pillow is not installed
    Release time: 2019-10-22 Clicks: 26

  • Grinding machine operating procedures

    1. When using the track Shenyang sander NMD-4 to grind the ballast, the workload should be determined according to the amount of work required to determine the blocking line or use the driving interval. Both operations should be protected in accordance with regulations. You should not go to work blindly. 2. The operator must read this manual carefully to understand the main technical performance and structure of the multifunctional grinding machine NMD-4.
    Release time: 2019-10-15 Clicks: 35

  • Introduction of wall sander?

    The Shenyang sander includes a dust removing device and a dust collecting device, wherein the dust removing device includes a casing, a dust removing motor, a dust removing cover and a working plate. The utility model separates the dust removing device and the dust collecting device, and the dust removing device and the dust collecting device are connected by a dust suction connecting pipe. The dust removal cover is provided with a dust suction pipe, a dust suction pipe and a dust suction pipe. One end of the dust connection pipe is connected, and the split mechanism can remove dust as much as possible
    Release time: 2019-09-23 Clicks: 22

  • What does a stretching machine do?

    Shenyang tensile machine is also called material tensile testing machine and general tensile strength testing machine. It is a new generation of mechanical testing equipment, which integrates computer control, automatic measurement, data acquisition, screen display and test result processing. Tensile testing machines are widely used in metrological quality inspection; rubber and plastics; metallurgical steel machinery manufacturing; electronic appliances; automobile production; textile
    Release time: 2019-09-11 Clicks: 22

  • Working principle of tamping machine

    The working principle of the Shenyang tamping machine is that the power generated by the engine is transmitted from the passive disk to the reduction box. After the gear is decelerated, the crankshaft gear rotates to drive the connecting rod, the pneumatic piston and the blower piston move up and down, and impact the handle and the handle. The brazing material hits the object with high frequency and high energy to achieve compaction of the working object. Tamping machines can be divided into types, hydraulic tamping machines, flexible shafts
    Release time: 2019-08-29 Clicks: 30

  • Precautions when using the sander

    Shenyang sander manufacturers remind you to pay attention to the following when using: 1. Do not use the sander to polish without the vacuum cleaner working, otherwise it will damage the motor. 2. It is strictly forbidden to step on the wires and beat the motor, and it is strictly forbidden to operate in places that are flammable and explosive. (If you do not follow the instructions, stepping on or hitting the machine to cause damage to the machine will not be covered by the warranty).
    Release time: 2019-08-09 Clicks: 69

  • Principle and motion analysis of tamping machine

    The principle of tamping machine, let Shenyang tamping machine manufacturers take you to understand that the tamping device works on the principle of eccentric shaft link swing vibration and one-step blessing. The hammer picks up the vibration force to the ballast, which causes the ballast to vibrate and move in a relatively stable direction, which will increase the compactness of the track bed. At the same time, the hammer picks up the ballast between the sleepers under the action of clamping. Bottom of pillow
    Release time: 2019-07-18 Clicks: 52

  • The working principle of the sander!

    The internal combustion steel rail grinder of the grinder is suitable for the grinding of 43kg / m-75kg / m rail welds, uneven joints, rail side fat edges, and rail surface welding repair. It has the advantages of high operating efficiency, good grinding quality, easy operation, and convenient access to the road. It is a tool for railway engineering overhaul, maintenance and repair. Shenyang sander manufacturers take you to know more! Working principle: NG
    Release time: 2019-05-15 Clicks: 73

  • Features of the stretch machine!

    The car body, chassis, fuel tank, radiator fins, steam drums of boilers, shells of containers, iron core silicon steel sheets of motors, electrical appliances, etc. are all stamped with a drawing machine. In instruments, household appliances, bicycles, office machinery, household utensils and other products, there are also a large number of stamping parts, all of which are stamped by hydraulic stretching machines, most of which are single-action stretching machines. Instrumentation, household
    Release time: 2019-03-18 Clicks: 45

  • Pneumatic tamping machine is powered by compressed air!

    Pneumatic tamping machine uses compressed air as power, light weight, high strength and low vibration. It is an indispensable tool in the foundry industry, aluminum plant and refractory brick production. It can also be used for tamping concrete, brick billets and repairing furnace linings. Shenyang tamping machine manufacturers take you to learn more! Check the hydraulic oil in the oil tank of the tamping machine, and fill the hydraulic oil from the oil tank filling port according to the oil meter. Fill the oil with the hole in the oil window
    Release time: 2019-02-28 Clicks: 65

  • Drawing machine series

    Shenyang stretcher is basically responsible for 1 or 2 production lines for large standard stretchers. A series of processing procedures from parts loading, card mounting, processing, inspection to cleaning, assembly, oiling, packaging, etc. are completely completed by high-precision and efficient automated equipment, advanced processing and detection technologies such as adaptive grinding technology, online Measurement technology, fault self-diagnosis technology, etc.
    Release time: 2018-12-14 Clicks: 114

  • Filled with marble glue!

    The stone sanding machine manufacturer tells you that filling the adjusted marble glue will cause a certain degree of shrinkage after the marble glue is completely solidified, so the marble glue should be slightly higher than the stone level, so that it will not be filled multiple times. Using polishing pads and fillers to make it a horizontal surface with the stone, increase the overall feeling of the stone, and solve the problem of the height between the gaps to prevent seams
    Release time: 2018-11-30 Clicks: 100

  • Floor grinding machine is a grinding and polishing equipment!

    The floor grinder is a grinding and polishing equipment. The material to be ground and thrown is placed on a flat grinding disc. The grinding disc rotates counterclockwise. The correction wheel drives the workpiece to rotate. The workpiece is pressed by gravity or other methods. Relative running friction to achieve grinding and polishing purposes. There are two sources of abrasive particles that produce grinding. One is from continuous application (often called free grinding).
    Release time: 2018-11-15 Clicks: 115

  • Do you know the safety precautions of the grinder?

    Do you know the safety precautions of the grinder? The cradle locking mechanism of the grinder is eccentrically compressed. The eccentrically compressed mechanism is also used in the barrel and the barrel cover, which is convenient and flexible to operate, saves time and labor, reduces the labor intensity of workers, improves the production efficiency of the machine, and reduces The equipment operation process. Multi-station automatic grinding machine adopts planetary gear transmission, with low noise, no pollution and occupying land
    Release time: 2018-09-28 Click times: 157

  • Small hydraulic tamping machine safety operation regulations!

    Small hydraulic tamping machine safety operation regulations! Before going on the road, check whether the parts are complete and complete according to the packing list, and whether the foundation fasteners are loose. If they are loose, they should be tightened and matched. Check whether the hand pressure pump works well; whether the inlet and outlet oil valves are tight, and only after confirming that it is normal, you can go on the road. Check that the internal combustion engine oil pan lubricating oil reserves are within the range of the scale and increase
    Release time: 2018-09-15 Clicks: 156

  • Shenyang drawing machine, what is stamping drawing?

    Shenyang drawing machine, what is stamping drawing? Stamping is a method of forming and processing a workpiece by applying external force to a sheet, strip, tube, profile, etc. by means of a stretching machine and a mold to plastically deform or separate it, thereby obtaining a workpiece of a desired shape and size. Car body, chassis, fuel tank, radiator fins, steam drums of boilers, shells of containers, iron core silicon steel sheets of motors, electrical appliances, etc.
    Release time: 2018-07-30 Hits: 176

55 total 20 Articles per page Pages: 1/3
2 3 下一页 尾页 1 2 3NextLast
online service
share it
Welcome to leave us a message
Please enter your message here and we will contact you as soon as possible.
Name
Contact person
phone
Landline / mobile number
mailbox
mailbox
address
address