Company Name: Shenyang Lubang Machinery Co., Ltd. (formerly Railway Machinery Plant)
Contact: Manager Lin
Fax: + 86-024-89648866
Mobile phone: 13998189555
Postal Code: 110121
Address: Wangyi Development Zone, Shenbei Street, Shenbei New District, Shenyang, Liaoning
Do you know any safety operating rules for Shenyang tamping machines ?
Before you go:
According to the packing list, check whether all parts are completely intact and whether the basic fasteners are loose. If they are loose, they should be tightened and matched. Check whether the hand pressure pump is outstanding and whether the oil inlet and outlet valves are tight. Check whether the oil sump of the internal combustion engine oil pan is within the range of the scale and add enough fuel. Check the hydraulic oil in the tamping machine's oil tank, and fill the hydraulic oil from the fuel tank filling port according to the rules of the oil meter. It is advisable to fill the oil at the center of the upper hole of the oil window. During operation, the oil level must not be lower than the red line under the oil window.
Pay attention to the operation:
If there is a severe lifting phenomenon when the road is clamped, it is used to judge whether the operating oil pressure is too high. The operators of the two tamping machines should pay close attention to the line conditions, cooperate closely, and strive to achieve coordinated actions. Always pay attention to whether the sound of the diesel engine is normal, and pay attention to whether the fuel is dry up at any time. Stop downtime on the line and troubleshoot.
Special safety rules:
Stop downtime on the line and troubleshoot. If the hydraulic system or engine fails during operation, the manual hydraulic pump should be used to lift the pick and handle the failure immediately.
Other matters needing attention:
When using in bridges, tunnels, and station areas, the placement of the lower rack must be selected in advance. When the tamping machine is operating, stop people from standing below the humane shelf. Because the driving part of the tamping machine rotates at high speed, stop approaching by hand or body, and check the fastening condition of the rotating part regularly. Such as the use of unilateral approach, stop in the center of the double track. When using a tamping machine with a small radius curve, pay attention to the tamping machine dumping.
The content of the article comes from the Internet. If you have any questions, please contact us!