Company Name: Shenyang Lubang Machinery Co., Ltd. (formerly Railway Machinery Plant)
Contact: Manager Lin
Fax: + 86-024-89648866
Mobile phone: 13998189555
Postal Code: 110121
Address: Wangyi Development Zone, Shenbei Street, Shenbei New District, Shenyang, Liaoning
Before using the Shenyang tamping machine , measure the insulation resistance before using the tamping machine that has been out of service or wet for a long time. Before each use, check the components and tighten the screws. Before working, carefully check the cables for damage and the chassis ground. The electric tamping machine should be used for 100 hours each time. The condition of bearing grease should be checked, and oil should be added if necessary. The oil should be changed every 1,000 hours and the bearings should be regularly checked for wear.
Bearing and winding temperatures should be checked during operation. When the ambient temperature is 35 ° C, the allowable temperature rise of the rolling bearing is 60 ° C (thermometer method). When the ambient temperature is 40 ° C, the allowable temperature rise of the winding is 75 ° C (resistance method). ), The electric tamping machine that has not been used for a long time should be stored in a dry warehouse, and must not be in contact with corrosive gases or chemicals.
When performing maintenance, turn off the engine and unplug it in time. When working on a compaction device, make sure that the device is locked, the oil pressure is not unloaded, and the engine is turned off. Before every operation, cleaning the road maintenance machinery is the best way to visually control the mechanical parts. Perform visual control checks daily and resolve issues in a timely manner.
Change the oil in less than 100 hours, and change the oil every 500 hours later, but pay attention to compatibility issues when using new oil, or clean the oil tank thoroughly. When lubricating the running parts and their parts, first remove excess oil or grease. For moving parts not covered in the maintenance manual, such as piston rods, cylinder hinges, guide bushes, slide rails, etc., use oil or grease every 50 hours. grease. Perform quality control on hydraulic oil every year, change oil every 250 hours, fill methanol in anti-freezing device of air system in winter, and clean oil suction filter every year.
Internal combustion tamping pick is a small road maintenance machine suitable for railway track bed maintenance. It is mainly used for compacting ballast track bed. It has a novel design and compact structure. It is a tamping device that moves up and down quickly and is easy to operate. It is particularly suitable for turnout tamping operations. This machine is mainly composed of gasoline engine, vibration damping device, transmission shaft, vibrating body and handle. It constitutes a stand-alone and complete hand-held tamping machine. It has neither lengthy cables nor bulky flexible shafts. Reasonable and compact structure, easy to use.
The content of the article comes from the Internet. If you have any questions, please contact us!