Company Name: Shenyang Lubang Machinery Co., Ltd. (formerly Railway Machinery Plant)
Contact: Manager Lin
Fax: + 86-024-89648866
Mobile phone: 13998189555
Postal Code: 110121
Address: Wangyi Development Zone, Shenbei Street, Shenbei New District, Shenyang, Liaoning
1. When using the track Shenyang sander NMD-4 to grind the ballast, the workload should be determined according to the amount of work required to determine the blocking line or use the driving interval. Both operations should be protected in accordance with regulations. You should not go to work blindly.
2. The operator must read this manual carefully to understand the main technical performance, structure and use of the multifunctional grinding machine NMD-4, and strictly observe the operating procedures.
3. The operator should wear work clothes, protective glasses, foot covers, gloves, etc. to prevent sparks from hurting people.
4. Before starting the gasoline engine, add gasoline that meets the orbital arc grinder NMD-4 brand number. When the engine is running, do not add gasoline to prevent fire.
5. When refueling, do not spill or spill the fuel tank; once it overflows, wipe it off; do not smoke or use open flames nearby.
6. When the gasoline engine gets hot, loosen the fuel tank cap carefully to reduce the air pressure in the fuel tank, so that the oil has room for expansion in the hot fuel tank.
7. When changing the grinding space, please turn off the gasoline engine.
8. When grinding on the line, please protect it in accordance with "technical regulations" and "regulations" to ensure personal health.
9. In the grinding of the NMD-4 orbital arc grinder, there is a train passing by. Avoid going down the road and evacuate the machine and personnel to prevent intrusion.
10. When grinding orbital arc grinder NMD-4, please pay attention to the surrounding people and equipment, and strictly prohibit all impact behaviors to prevent grinding splash, grinding wheel crushing and personnel and equipment.
11. Orbital arc grinder NMD-4 operators must immediately change their work clothes when splashing gasoline.
12. When changing the grinding wheel and repairing the machine, turn off the engine.
13. After changing the grinding wheel, leave it idle for 30 seconds. Unrelated personnel must not be approached while running the test.
14. Always check wheel fastening nuts and guards.
15. Do not use a grinding wheel whose line speed does not meet the requirements of this machine.
16. After running the arc grinder NMD-4, turn off the engine, remove it from the production line restrictions, and place it in a suitable place.
The content of the article comes from the Internet. If you have any questions, please contact us!