Company Name: Shenyang Lubang Machinery Co., Ltd. (formerly Railway Machinery Plant)
Contact: Manager Lin
Fax: + 86-024-89648866
Mobile phone: 13998189555
Postal Code: 110121
Address: Wangyi Development Zone, Shenbei Street, Shenbei New District, Shenyang, Liaoning
Pneumatic tamping machine is powered by compressed air, light in weight, strong in strength and low in vibration. It is an indispensable tool in the foundry industry, aluminum plant and refractory brick production. It can also be used for tamping concrete, brick billets and repairing furnace linings.
The electric tamping machine is used to compact the ballast under the sleepers during the concrete pouring of the construction and the maintenance of the railway. Shenyang tamping machine manufacturers take you to know more about tamping machine!
Employees should pay special attention to the correct use of the tamping machine when using it. If there are debris, sand and other things, it is easy to damage the tamping machine and clean it in time after use.
If there is a damaged place during use, you need timely warranty, please have professional staff come to repair it, you can't repair it yourself, it will make it difficult to return it.
When the tamping machine is not used for a long time, it should be oiled in time after use. For the maintenance of the tamping machine, we must pay attention to it. Good maintenance for the tamping machine is beneficial to the extension of the service life.
After the loading truck is aligned, turn on the automatic feeder to load coal, about 20 seconds. The feeder automatically stops. Ready to tamp.
Before starting tamping, first open the bumper. Because the bumper is under the tamping cymbal, it is to prevent the tamping hammer from falling and hurting people in non-working conditions.
Manually open the tamping machine, the upper tightening flap of the tamping machine opens under the action of hydraulic pressure, the drive unit drives the eccentric wheel to rotate, the tamping hammer falls, and the tamping hammer reciprocates up and down under the drive of the eccentric wheel.
After the tamping hammer has been working for 5 to 7 minutes, the coal cake in the coal loading truck is basically in place. At this time, the limit sensor on the top of the tamping machine receives the induction signal of the rising tamping hammer, and the feeder and tamping machine Automatic stop.
The content of the article comes from the Internet. If you have any questions, please contact us!